Volcato Cargo C — a summer tyre designed for vans and other light commercial vehicles. Its tread features a road-oriented, longitudinal rib pattern: five working zones are separated by four wide circumferential grooves. Buyers get a tread design focused on highway performance, with long continuous contact ribs and an extensive channel network across the entire width of the tread surface.
Four longitudinal grooves run around the tyre circumference, forming uninterrupted paths for water evacuation from the contact patch. This layout keeps drainage channels open throughout the full wheel rotation. For buyers, this means water management is handled by a continuous longitudinal system across the entire tread, rather than isolated local sipes or voids.
The central area consists of three tightly packed rib zones. Their elements are elongated in the direction of travel, ensuring long, continuous rubber sections remain in road contact. For drivers, this translates into solid longitudinal support without large, individual tread blocks typical of off-road or traction-oriented patterns.
The edges of the central elements feature a stepped design and are enhanced with short, angled sipes. These make the tread surface less smooth and increase the number of working edges. As a result, the tyre gains additional biting edges while maintaining a dense rib structure.
The shoulder zones of the Cargo C are wide and cut with numerous lateral grooves. These grooves extend the tread pattern detail toward the edges of the tread surface. Buyers benefit from active tread elements not only in the center: rib geometry and extra biting edges cover the full tread width.
The Cargo C tread combines longitudinal support ribs, circumferential grooves, and multiple sipes. For buyers, this means a straightforward summer commercial tyre: longitudinal grooves provide water evacuation paths, rib zones deliver stable road contact, and sipes add extra biting edges in both the central and shoulder areas.
Key features of Volcato Cargo C
- five rib zones form long continuous support ribs;
- four circumferential grooves create uninterrupted water evacuation paths;
- stepped edges on central elements increase the number of working edges;
- short, angled sipes complement the dense rib structure;
- lateral shoulder grooves extend the tread pattern to the edges of the tread surface;
- well-developed shoulder zones carry the tread design across the full tread width;
- road-focused geometry is suitable for summer use on light commercial vehicles.
Enlarge 
Approximate calculation.
Credit amount from 2 000 to 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more