Tyres and wheels for Dongfeng K01, wheel size on Донгфенг К01

Tires on Dongfeng K01 (Донгфенг)

The range of compact commercial vehicles Dongfeng K01 has been produced since 2008. Initially, it was released under the sub-brand of the Chinese brand DFSK, being developed on the basis of a van with the index 07. All the modifications presented in the range are focused on performing a wide range of tasks on the so-called "last mile" in conditions of dense urban development.

Design Features

The model is based on the DFSK 07 platform - a utility chassis created for the segment of light commercial vehicles with a priority on simplicity and durability, as well as a layout borrowed from trucks. This is a ladder-type frame with a longitudinal engine arrangement and rear-wheel drive with a non-split axle and leaf springs, which provides the vehicle with excellent reliability under high loads even when operating on poor roads.

Range of Versions and Layout Options

The range of versions of this model consists of several variants of execution, differing in purpose and body type. The base is considered a modification with a single cabin and a board platform, designed for the transportation of building materials, equipment, and goods for retail trade. For tasks where personnel delivery is required, a modification with a two-row cabin is provided, combining a passenger compartment and a shortened cargo platform. Also, in the range, there are all-metal vans focused on courier and service services, where cargo protection and the possibility of installing specialized equipment are important. All versions use a single chassis from DFSK 07, which simplifies maintenance due to deep unification between them.

Engines and Chassis

The car was equipped with gasoline "atmospheric" engines of small displacement, focused on economical operation and high resource. The range included engines with a volume of 1.0 liters with a power of 53 hp with a torque of 85 Nm, as well as 1.1-liter units that developed up to 58 hp and 90 Nm. The most productive version was considered a 1.3-liter engine, which produced 82 hp and 102 Nm of torque, which significantly improved traction when fully loaded.

All power units were combined with a 5-speed manual transmission. The suspension is made according to the classic commercial scheme: independent in front and spring in the back, designed for constant loads. The braking system is combined - disc mechanisms in front and drum behind, which provides an acceptable balance between efficiency and reliability.

Equipment and Ergonomics

The "cargo" layout was supplemented by utility in equipment. In standard versions, a power steering, a simple heating and ventilation system, an analog instrument panel, and a minimal set of electronic systems are offered. The interior is made of wear-resistant materials, but, nevertheless, the cabin layout is focused on the convenience of the driver during long shifts. Particular attention is paid to the geometry of the cargo compartment, the height of loading, and the possibility of reliable cargo fixation, which directly affects performance in daily operation.

Disks and tires for these cars are selected taking into account the frame design and constant working loads: 14-inch wheels with commercial tires of increased carrying capacity are standard. Ordering wheel products in the "Mosavtoshina" online store allows you to choose reliable solutions with optimal resource and cost.

Advantages of selecting tires on our website for Dongfeng K01:

- thanks to the diversity and multitude of tire models in the catalog, it is easy to select options for the most specific operating conditions;
- 14-inch stamped and light-alloy wheels are always available, fully corresponding to the technical features of this commercial equipment, regardless of the version;
- a flexible discount system for new and regular customers reduces the total costs of vehicle maintenance;
- consultants will promptly eliminate difficulties in finding optimal disks and tires, offering models with correct parameters.