Грузовые шины Fulda RegioForce 3

The Fulda RegioForce 3 tire has a commercial purpose and is installed on the drive axle of cargo transportation. It is characterized by good resistance to aquaplaning, increased traction and adhesion properties, and the possibility of tread restoration.

The model has five ribs, three of which are located in the central part. Each of them is segmented into separate blocks with zigzag lamellas. This structure contributes to good traction even on poor road surfaces. The presence of a large number of deep grooves and a semi-open shoulder zone ensures rapid water drainage.
In the shoulder zone, the blocks are connected by special bridges. They provide preservation of shape under the influence of lateral loads that occur during turns. This achieves stability of the contact patch and, as a result, uniform wear. An important aspect is the height of the rubber layer, which allows cutting grooves in the tread, extending the service life of the tire.

Main features of Fulda RegioForce 3

- improved traction and short braking distance due to numerous traction edges formed by the faces of the blocks and lamellas;
- installation on the drive axle of cargo transportation;
- possibility of restoring the tread by re-cutting it.