Top trust SH-319 – an industrial model, created for equipping a wide range of wheeled special equipment. It was designed to become a reliable link between the machine's power and the surface's instability.
Purpose and operating conditions
The tyre was developed for wheeled excavators, whose working environment is ground surfaces with low bearing capacity. Whether it's quarry development, construction site planning, or moving bulk materials — the model demonstrates stability where standard tyres slip.
Tread technology
The directional tread pattern design is a "calling card" in this segment. Massive blocks with elongated transverse edges work like "buckets". They capture loose soil, providing a precise response to the accelerator pedal. Special attention was paid to the shoulder area, where the void intervals are increased, allowing the tyre to self-clean. Sticky clay or wet sand doesn't "stick" between the elements, but is thrown out, so the traction force remains unchanged even in the most difficult conditions.
Control over heating and resistance
The main engineering find is the overlapping blocks in the central part of the tread. This architecture performs two critically important tasks:
- optimization of rolling resistance — the dense central strip minimizes tyre deformation, saving fuel and reducing vibration;
- during long high-speed runs, the blocks distribute the thermal load over the entire surface, preventing local overheating.
Load-carrying capacity reserve
In the model, the breaker and sidewall construction were strengthened so that the tyre can withstand not only vertical loads from the machine's weight but also lateral impacts during turns. A special high-strength cord works like a force belt, reducing the risk of cuts and punctures.
Key features of Top trust SH-319:
- the directional tread with increased voids guarantees confident movement on wet and loose soils;
- the optimized profile increases lateral stability on slopes and reduces the risk of skidding during maneuvering with a full bucket;
- the overlapping blocks in the center reduce rolling resistance and extend the service life;
- the reinforced frame provides high load-carrying capacity and protection against mechanical damage.
Enlarge 
КИТАЙ
Approximate calculation.
Credit amount from 2 000 to 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more