The Atlander PrimeForce A/T model was created as a hybrid solution for drivers who operate their vehicle in a mixed cycle: daily urban highways alternating with dirt roads, unpaved roads, and light off-roading. The brand, known for its balance of price and technology, has invested in this tyre with proven design solutions characteristic of the premium segment. The result is a tyre that does not require compromises, either in handling or in snow/off-road capability.
Grip and self-cleaning geometry
The tread pattern is built on reinforced blocks with staggered gripping edges. This architecture provides effective penetration into loose soils due to the increased area of the block's side surfaces and active self-cleaning of the grooves from adhering mud, which prevents "clogging".
The drainage system, consisting of wide longitudinal and diagonal channels, is designed with a high throughput capacity. It instantly removes water and liquid mud, minimizing the risk of skidding.
High-durability carcass
The tyre features a three-layer carcass made of high-strength synthetic cord with increased thread density. The breaker layer is reinforced with a steel cord, which provides resistance to deformation at low pressure and sufficient stiffness to maintain a stable contact patch. Additional reinforcement of the sidewall protects against sidewall cuts, which is critical for active off-roading.
Asymmetric design
The outer and inner sides of the tread perform different tasks - this is a classic solution. The outer shoulder area is equipped with more rigid, gripping blocks that work as "fixators" on turns, preventing the front axle from slipping. The inner zone is optimized for water drainage and reducing acoustic noise on bare asphalt. Thanks to this, the vehicle maintains directional stability at speeds, and turns are passed with a predictable reaction.
Special rubber compound
The compound contains high-dispersion silicone-organic compounds that provide increased resistance to wear and maintain elasticity at negative temperatures.
Key features of the Atlander PrimeForce A/T:
- aggressive blocks with self-cleaning grooves provide snow/off-road capability on loose soils, while wide drainage and asymmetry provide stability on wet and dry asphalt;
- the 3-layer cord made of high-strength polyester and a steel breaker increase resistance to punctures and impacts, allowing safe movement on rocky terrain;
- increased wear resistance and cold resistance maintain elasticity and grip over a wide temperature range;
- the variable block pitch and damping properties of the rubber reduce the level of road noise;
- a set of design and materials science solutions ensures increased mileage.
Enlarge 
КИТАЙ