Model Rockbuster H658 R4 is designed as a specialized tyre for loaders and excavators operating in various conditions. This tyre is where every structural element is subordinated to one goal: maximum realization of traction force with minimal losses due to deformation and heat.
Reliability basis
The foundation is a all-steel diagonal carcass. This solution translates the tyre into a class of increased load-carrying capacity: the steel cord provides stiffness, while simultaneously damping peak shock loads. Importantly, the metal carcass reduces the tendency to local thread breaks. In the event of punctures, the damage remains localized and does not spread throughout the structure.
Traction physics and directional stability
Engineers chose a directional tread pattern. Wide blocks with long curved walls form engaging surfaces that, when rotating, dig into soft soil, creating an active traction force.
Resistance management
The offset of transverse blocks relative to each other creates the effect of a discontinuous running track, which significantly reduces hysteresis losses during rolling. In practice, this means less heat buildup in the shoulder area at high speeds and reduced rolling resistance. Additionally, such geometry allows the tyre to enter turns more smoothly, reducing lateral wear.
Self-cleaning system
When working on wet clay or loam, the tread has a tendency to "clog up" — dirt fills all the recesses, and the tyre turns into a "bald" surface. The model combats this due to its voluminous voids. During wheel rotation, centrifugal force and shear deformations actively push the stuck dirt outwards, restoring traction. This is especially valuable on complex off-road sections.
Rubber compound
A special rubber compound has been developed for the model, providing high resistance to abrasive wear. But unlike its analogues, the compound maintains sufficient elasticity to prevent cracking when in contact with sharp fragments of rocks. This balance allows the tyre to withstand intense load cycles.
Key features of Rockbuster H658 R4:
- wheel excavators, front loaders, and other special equipment;
- optimized for soft and medium-density soils, where maximum traction force realization is required;
- cord with reinforced steel breaker increases impact strength, load-carrying capacity, and resistance to punctures;
- increased inter-block channels actively remove dirt and clay, preventing tread clogging and loss of traction;
- abrasion-resistant compound extends the service life and maintains the geometry of the block edges in heavy operating conditions.
Enlarge 
КИТАЙ
Approximate calculation.
Credit amount from 2 000 to 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more