Maxam MS904 E R4 — a model for industrial-type equipment fleets operating on construction sites, quarries, and objects with heavy conditions. The tire is designed for excavator-loaders, telehandlers, and industrial tractors, where stability, traction, and protection from mechanical damage are critically important. The diagonal construction, combined with the reinforced R-4 class tread, provides the necessary strength reserve when working with bulk soil, gravel, and construction debris.
Tread specification
The tread belongs to the category designed for harsh industrial applications. Large massive blocks form an aggressive gripping profile, capable of penetrating loose and friable surfaces without losing traction. The increased height of the lugs guarantees operability on deep bulk and spoil tips.
Self-cleaning geometry
The inter-block space is designed with constant contact with adhering materials - clay, sand, fine-grained gravel. The design provides active self-cleaning: when the wheel rotates, the soil does not get stuck in the tread, but is thrown out by centrifugal force.
Transverse stabilization
The orientation of the ground grips is optimized not only for longitudinal traction but also for damping transverse oscillations. When moving over uneven surfaces, the level of vibration transmitted to the frame and operator is reduced. The equipment rocks less, control becomes more precise, and the driver's fatigue decreases.
Damage protection
The increased thickness of the tread works like a mechanical buffer. When in contact with sharp inclusions (reinforcement, rock debris, construction waste), the tread takes the impact on itself, not transmitting the destructive load to the carcass. The risk of punctures and local ruptures is minimized.
The compound mixture is developed according to a recipe of increased abrasive resistance. The material resists wear when in contact with hard mineral surfaces and maintains the elasticity necessary for operation in negative temperatures. Chemical resistance to oils and technical liquids expands the application area of the model on industrial sites.
Diagonal construction
The diagonal frame is chosen not by chance. For industrial equipment operating in conditions of cyclic overloads and shock impacts, the diagonal architecture offers:
- high elasticity of the sidewalls - the ability to deform without destruction when driving over obstacles;
- stability against delamination - the multi-layer structure evenly distributes stresses along the cord threads;
- repairability - such tires are easier to restore by applying a tread.
Key features of Maxam MS904 E R4:
- reinforced industrial tread for extreme construction and quarrying conditions;
- active removal of soil from the inter-block space, maintaining traction.
- reduction of vibrations, comfort of control, precision of positioning.
- reinforced tread layer and wear-resistant compound prevent punctures and cuts;
- elasticity, impact resistance, suitability for restoration due to the diagonal carcass.
Enlarge 
КИТАЙ
Approximate calculation.
Credit amount from 2 000 до 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more