The Goodyear DT824 was designed with the specific requirements of powerful agricultural tractors and harvesting equipment in mind, which operate under increased loads when performing a wide range of field work. The model belongs to the category of tyres with a wide profile and increased volume, combining high load capacity with gentle impact on the soil.
Wide profile for preserving soil structure
One of the main features of the tyre is its increased internal volume. Thanks to the wide profile and large amount of air, the tyre can operate at lower pressure, forming a large contact patch. This allows for a more even distribution of load across the field surface, reducing pressure on the topsoil layer and maintaining high traction properties.
Deep tread with effective self-cleaning
The tread has a typical design for tyres with a V-shaped arrangement of narrow blocks, but differs in the height of the elements, which is a quarter higher than that of a significant number of its "classmates". The blocks themselves have an angle of about 45 degrees, providing effective implementation of traction force on soil with reduced bearing capacity. It's worth noting the large voids between the elements, which maintain the functionality of the tyre on wet soil.
Durable radial carcass for high loads
The design features a radial carcass with a steel cord that has increased strength and resistance to breakage and stretching. This solution prevents deformation of the tyre under significant load, increasing its load capacity and improving pressure distribution in the contact area. An additional advantage is the smooth ride during transport crossings and reduced rolling resistance, which contributes to reduced fuel consumption and increased equipment productivity.
Key features of the Goodyear DT824:
- the increased height of the tread blocks by a quarter provides more efficient transmission of traction force to the soil;
- the 45-degree angle of the blocks gives the tyre balanced driving qualities when working in mixed conditions;
- the large width of the tread and increased volume of the tyre's internal cavity reduce pressure on the topsoil layer, preventing its compaction without affecting the tyre's traction properties;
- the reinforced radial carcass and robust bead area are designed for operation with high loads during field and transport work.
Enlarge 
Approximate calculation.
Credit amount from 2 000 to 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more