The Kapsen HS918 truck tire is favorably distinguished from most similar tire products only if it is installed on any axle of a truck used in the construction industry. After all, this model has sufficient versatility to perfectly suit both asphalt roads and difficult off-road conditions.
S-shaped tread pattern
A significant part of the universal properties of this tire was achieved due to the original S-shaped design of the symmetrical non-directional tread pattern. It is distinguished by the presence of a large number of individual blocks distributed over two main functional parts of the tread - the central and two shoulder zones.
The central part is a very wide longitudinal rib consisting of many very massive blocks of the Kapsen HS918 complex polygonal configuration. Such a design provides the tire with good directional stability and low rolling resistance on asphalt roads while maintaining high traction properties off-road.
In turn, the shoulder zones contain many double quadrangular blocks arranged transversely relative to the direction of movement. During movement, they form a large number of transverse ribs that stretch from one side of the tread to the other. Such a configuration provides a contact patch with very long transverse edges, due to which the tire demonstrates exceptionally high traction properties, primarily on soils with low bearing capacity.
Self-cleaning tread
In addition to the large number of individual blocks, it is worth noting the significant distance between them. It is more than enough for the tread to self-clean even from large stones that get stuck in it when driving outside roads with a solid surface. This significantly increases reliability and cross-country ability, which further expands the scope of application of this tire.
Main features of the Kapsen HS918 tire
- specific scope of application, due to the possibility of operation exclusively on trucks used in the construction industry, as well as other industries;
- good directional stability and fuel economy due to the wide central longitudinal rib;
- excellent traction properties in the longitudinal direction due to the arrangement of tread blocks that form very long transverse edges of adhesion during movement, stretching from one side of the tread to the other;
- excellent reliability due to a rubber compound resistant to wear, punctures, and cuts.
Enlarge 
КИТАЙ
Approximate calculation.
Credit amount from 2 000 до 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more