The Neumaster W-9C model is designed for fork lift trucks operating in intensive warehouse, logistics, and construction scenarios. This is not a specialized product, where each layer of rubber and cord is subordinated to two goals — to withstand loads without deformation and to maintain traction.
Load capacity
The tire is designed to work with maximum weights close to the nominal load capacity of the forklift. The key difference from standard models is the reinforced breaker layer with an increased weaving pitch. This prevents radial rupture. Additionally, the sidewall design has an additional reinforcing layer of high-strength synthetic fiber.
Compound
The tread manufacturing uses a rubber compound based on modified natural rubber and technical carbon. This provides abrasion resistance, resistance to mechanical damage, and low residual deformation.
Traction properties in an industrial environment
The tread pattern consists of large blocks with a diagonal arrangement. This provides a maximum coefficient of friction. The contact patch is optimized — its area is increased by 15-20% compared to standard industrial tires. This is critical for sharp starts and braking with a load.
Key features of Neumaster W-9C:
- adaptation to any fork-type lift trucks;
- steel breaker and synthetic fiber in the sidewall for working with heavy weights without deformation and puncture damage;
- compound resistant to chipping and abrasive wear;
- a pattern with large blocks and deep grooves provides reliable traction on various surfaces.
Enlarge 
КИТАЙ
Approximate calculation.
Credit amount from 2 000 to 300 000 rubles.
Initial payment from 0% to 90%.
Loan term from 3 to 36 months.
The interest rate is calculated individually.
Read more